Elite The Protector El manual del propietario descargar pdf (Pagina 11)

If you are interactive with your panel and the panel hangs

up on you, the system is calling in a report to the central

monitoring station due to an action made by you or some-

one at the security system site.

How to Use Your Touchpads

Touchpads are used to control the security system from

any location within or near your home.

Remote Handheld Touchpad

Interfacing with the system using a Remote Handheld

Touchpad is similar to using the panel.

System Status

Press

System Status

once

hear

information about your system

from the panel.

ARM Doors & Windows

Press

Arm Doors & Windows

button once to turn the security

system protection on.

Press twice to eliminate the pre-

programmed entry delay.

ARM Motion Sensors

Press

Arm Motion Sensors

but-

ton once to turn protection on.

Disarm

Press

Disarm

button once and

enter your access code using the NUMERIC

buttons to

turn security protection off. To subdisarm the system, enter

the master access code.

Subdisarm

Enter your master code using the NUMERIC buttons

while the system is disarmed. Panel will announce, system

disarmed. The

Disarm

button on the panel will begin to

blink.

Emergency

Press both

EMERGENCY

buttons for 3 seconds to cause

the system to call a central monitoring station to report a

non-medical emergency.

Keychain Touchpad

If your installer programmed the Key-

chain Touchpad with no entry delay, and

you armed the system with the Keychain

Touchpad, you must disarm your system

before entering the home to avoid causing

an alarm.

WARNING!

To avoid causing false alarms,

check with your installer on how your touchpad

options are programmed.

LOCK

Press once to arm doors and windows.

LOCK

Press twice to arm doors, windows, and

Motion Sensors.

LOCK

and

UNLOCK

Press both buttons simultaneously for 3 sec-

onds to send a panic alarm to the central

monitoring station.

Note

Panic alarms need to be silenced from the panel, a

remote handheld touchpad or another keychain

touchpad. They cannot be silenced from the same

keychain that activated the alarm.

UNLOCK

Press to disarm your security system.

STAR

Can be programmed to control a device

connected to a universal module.

Note

For any keypress on the Keychain Touchpad, hold

the button until the indicator light blinks.

Phone Commands

Panel Function Phone Command

DISARM * + CODE + 1

ARM Doors/Windows * + CODE + 2

ARM Doors/Windows with

No Entry Delay

* + CODE + 2 + 2

ARM Motions * + CODE +3

ARM Doors/Windows and

Motions

* + CODE + 2 + 3

ARM Doors/Windows with

No Entry Delay and Motions

* + CODE + 2 + 2 + 3

System Status * + CODE + # + 1

Hang Up * + CODE + 9

8 9

SYSTEM STATUS

ARM

Doors &

Windows

ARM

Motion

Sensors

DISARM

OFF

Emergency -

Press & Hold Both Keys

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comentarios a estos manuales

Sin comentarios

Elite The Protector El manual del propietario Pagina 11

Comentarios a estos manuales