Elite R800D Manual de usuario descargar pdf (Pagina 13)

Elite Learning Universal Remote Control – R800D

Ver. 1.1 www.elitescreens.com / [email protected] / Page 13 of 23

2. In the process by “SET-UP by auto search”, you have found the digital number for your matched device,find

the brand code no of your device brand (e.g. Philips 001).

3. Press the SET key on your new remote control for more than 3 seconds, then release it.

4. Press the or keys to select to CODE SETUP in the LCD menu, and press the OK key.

5. The screen shows the DEV SEARCH in the LCD menu, press the or keys to select to DEV

SETUP in the LCD menu, and press the OK key.

6. Then you press device key to select your desired operation device(e.g. TV) and then press the OK key, you

must now enter the 3-digit device code (e.g. 001 for Philips TV)

7. Press the OK key to save it and LCD shows SUCCESS, and press EXIT key two times to exit the SETUP

mode.

8. You check the function of the keys on remote control(such as the POWER or CH+…etc). If most keys on your

new remote control do not function correctly, try another 3-digit device code (e.g. 004…) from the list under the

same brand. Repeat steps 3 to 7 until all the basic functions operate correctly.

☆4: Set up Clock

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 22 23

Sin comentarios

Elite R800D Manual de usuario Pagina 13